EasyManuals Logo
Home>JVC>Receiver>KD-X282DBT

JVC KD-X282DBT User Manual

JVC KD-X282DBT
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Getting Started
Acknowledge the crossover type and cancel the
demonstration
When you turn on the power for the first time (or
[FACTORY RESET]
is set to
[YES]
, see page6), the display shows: “2-WAY X’OVER” or “3-WAY X’OVER”
“PRESS” “VOLUME KNOB” “TO CONFIRM”.
1 Press the volume knob to acknowledge the current crossover type.
Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.
To change the crossover type, see page22.
2 Press the volume knob.
[YES]
is selected for the initial setup.
3 Press the volume knob again.
“DEMO OFF” appears.
Set the clock and date
1
Press and hold .
2 Turn the volume knob to select
[CLOCK]
, then press the knob.
To adjust the clock
3 Turn the volume knob to select
[CLOCKADJUST]
, then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Set the time in the order of “Hour” “Minute”.
5 Turn the volume knob to select
[CLOCK FORMAT]
, then press the knob.
6 Turn the volume knob to select
[12H]
or
[24H]
, then press the knob.
1
2
To set the date
7 Turn the volume knob to select
[DATESET]
, then press the knob.
8 Turn the volume knob to make the settings, then press the knob.
Set the date in the order of “Day” “Month” “Year”.
9 Press to exit.
To return to the previous setting item, press
.
Set the basic settings
1
Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[SYSTEM]
[KEY BEEP]
(Not applicable when 3-way crossover is selected.) (Page 22)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[SOURCE SELECT]
[AM SRC]*1
[ON]: Enables AM in source selection. ; [OFF]: Disables. (Page 9)
[BTAUDIO SRC]*1
(For KD-X282DBT)
[ON]: Enables BT AUDIO in source selection. ; [OFF]: Disables.
(Page 19)
[BUILT-IN AUX]*1
[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 12)
*1: (see page 6)
3
KD-X282DBT_E_B5A-3845-00_EN_1st Draft.indd 5KD-X282DBT_E_B5A-3845-00_EN_1st Draft.indd 5 7/9/2021 4:26:56 PM7/9/2021 4:26:56 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X282DBT and is the answer not in the manual?

JVC KD-X282DBT Specifications

General IconGeneral
DIN size1 DIN
Impedance75 Ω
Output power200 W
Product colorBlack
Volume controlRotary
Frequency range531 - 1611 Hz
Disc types supported-
Audio output channels7.1 channels
Maximum power per channel50 W
Signal-to-Noise Ratio (SNR)6.2 dB
Mobile operating systems supportedYes
CD-R playbackNo
Audio formats supportedFLAC, MP3, WAV, WMA
Display typeLCD
Illumination colorRed, White
Bluetooth version4.2
USB port positionFront
Bluetooth profilesAVRCP
USB connector typeUSB Type-A
USB ports quantity1
Bluetooth functionsAudiostreaming, Handsfree calling
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
FM usable sensitivity6.2
Supported radio bandsDAB, FM, LW, MW
Preset stations quantity42
Hands-free callingKeep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
Weight and Dimensions IconWeight and Dimensions
Depth100 mm
Width182 mm
Height53 mm
Weight60 g

Related product manuals