JVC KD-X462BT

10
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
For key layout on the faceplate, see page 3 or page 4.
To On the faceplate On the remote control
Reverse/
Fast-forward*3
Press and hold S / T. Press and hold H / I.
Select a file
Press S / T. Press H / I.
Select a folder*4
Press 2 J / 1 K. Press J / K.
Repeat play*3*5
Press 4  repeatedly.
[TRACK REPEAT] / [FOLDER REPEAT] / [ALL REPEAT] : MP3/WMA/AAC/
WAV/FLAC file
[ONE REPEAT] / [ALL REPEAT] / [REPEAT OFF] : iPod
Random play*3*5
Press 3  repeatedly.
[FOLDERRANDOM] / [ALL RANDOM] / [RANDOM OFF] : MP3/WMA/AAC/
WAV/FLAC file
[SONG RANDOM] / [ALL RANDOM] / [RANDOM OFF] : iPod
*3 Not applicable for ANDROID.
*4 This does not work for iPod/ANDROID.
*5 For iPod: Applicable only when [HEAD MODE] is selected.
USB/iPod/ANDROID
Select music drive
While in USB source, press 5 MODE repeatedly.
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass
Storage Class).
• Selected drive of a multiple drive device.
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver’s
operations from the iPhone/iPod (via USB input terminal).
Preparation:
• Install the latest version of JVC Remote application on your
device before connecting.
• For more information, visit <http://www.jvc.net/cs/car/>.
You can make the settings in the same way as connection via
Bluetooth. (Page 19)
Select control mode
While in iPodUSB source (or iPodBT source), press 5 MODE
repeatedly.
[HEAD MODE] : Control iPod from this unit.
[IPHONE MODE] : Control iPod using the iPod itself. However, you can
still perform play/pause, file skip, fast-forward or fast-
reverse from this unit.
JS_JVC_KD_X462BT_M_EN_1.indd 10JS_JVC_KD_X462BT_M_EN_1.indd 10 6/5/2018 11:06:04 AM6/5/2018 11:06:04 AM