17
ENGLISH
TAPE OPERATIONS
Listening to a cassette
You can play back type I (normal) tapes.
1
Insert a cassette into the cassette
compartment.
The unit turns on and tape
play starts automatically.
When one side of the tape
reaches its end during play,
the other side of the tape
automatically starts playing.
(Auto Reverse)
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, select the cassette player as the
source by pressing TAPE 23 to start tape play.
2
Select the tape direction.
Each time you press
TAPE 23, the tape direction
changes alternately—
forward ( ) and
reverse ( ).
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The
source changes to the previously selected one.
If you change the source, tape play also stops
(without ejecting the cassette this time).
• You can also eject the cassette by pressing 0
while the unit is turned off.
To fast-forward and rewind a tape
To stop fast forward and rewind at any
position on the tape, press TAPE 23.
Tape play starts from that position on the tape.
Note:
When the tape reaches its end while fast-forwarding,
the tape direction will be changed automatically.
Press ¢ for more than one
second to fast-forward the tape.
When the tape reaches its end, the
tape is reversed and playback
starts from the beginning of the
other side.
Press 4 for more than one
second to rewind the tape.
When the tape reaches its end,
playback of the same side starts.
Tape direction
EN17-19KS-FX742R[E_EX]f.p65 1/8/03, 5:08 PM17
To Next Page
Loading...
Need help?
General
