JVC KS-FX742R - Default Chapter; How to Reset Your Unit; How to Use the MODE Button

2
ENGLISH
How to reset your unit
While holding SEL (select), press (standby/on/attenuator) for more than 2 seconds.
This will reset the built-in microcomputer.
Note:
Your preset adjustments—such as preset channels or sound adjustments—will also be erased.
How to use the MODE button
If you press MODE, the unit goes into functions mode, then the number buttons and ¢ /
4 buttons work as different function buttons.
Ex.: When number button 2 works as MO (monaural) button.
To use these buttons for original functions again after pressing MODE, wait for 5 seconds
without pressing any of these buttons until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
SEL (select)
(standby/on/attenuator)
Time countdown indicator
EN02-04KS-FX742R[E_EX]f.p65 1/8/03, 5:06 PM2