15
Changing the aspect ratio
You can select an appropriate aspect ratio for the playback video signals.
Basic procedure
Remote controller only
Each time you press the button, aspect ratio changes.
Selectable aspect ratio
When incoming 16:9 video signal:
FULL:
Pictures are fully shown on the screen.
• In some cases, the black bars may be shown at the top and
bottom sides of the screen.
NORMAL:
Pictures are reduced horizontally.
• The black bars will be shown at the left and right sides of
the screen.
• In some cases, the black bars may be shown also at the top
and bottom sides of the screen.
JUST:
The middle of pictures are compressed horizontally, and the
left and right side of the picture enlarged horizontally.
• In some cases, the black bars may be shown at the top and
bottom sides of the screen.
ZOOM:
Pictures are enlarged on the screen so that no black bars will
be shown on the screen. (The entire picture cannot be shown
on the screen.)
ASPECT
Continued on the next page...
Inst_KS-JA0502-4[U].indb 15Inst_KS-JA0502-4[U].indb 15 09.11.10 3:30:24 PM09.11.10 3:30:24 PM
To Next Page
Loading...
Need help?
General
