18
The disc type is automatically detected, and
playback starts automatically (for DVD:
automatic start depends on its internal program).
• This unit can play back either audio (MP3/
WMA/WAV), picture (JPEG), or movie
(MPEG-1/MPEG-2/DivX) files if a disc
includes any of the files. Set the playback
file type on DVD setup menu (see page 28)
before playing back a disc containing files of
different kinds.
If the current disc is not a DVD and VCD with
PBC, all tracks will be played repeatedly until
you change the source or eject the disc.
• If a title list or disc menu appears after
inserting a disc, see “Disc menu operations”
on page 23.
The following marks are used to indicate
the playable discs.
DVD Video Video CD with PBC
Video CD with/
without PBC
Audio CD/
CD Text
MP3/WMA/WAV
disc
JPEG disc
DivX disc MPEG-1/MPEG-2
disc
All discs listed here
• Disc operations are explained mainly
using the buttons on the remote controller;
however, the buttons on the unit can work in
the same way if they have the same names or
marks.
Starting playback
1 Open the liquid crystal panel.
• You can play a disc even if the monitor is
closed.
2 Turn on the power.
• Do not insert a disc while
the power is turned off.
Monitor only
3 Insert a disc into the loading slot.
• For some discs, playback does not start
automatically.
If playback does not start...
Disc operations
Playing a disc
If “ ” appears on the monitor when
pressing a button, the disc cannot accept an
operation you have tried to do.
• In some cases, without showing “
,”
operations will not be accepted.
Playback (shining) side
facing down
Remote controllerMonitor
Inst_KS-JA0502-4[U].indb 18Inst_KS-JA0502-4[U].indb 18 09.11.10 3:30:25 PM09.11.10 3:30:25 PM
To Next Page
Loading...
Need help?
General
