To Next Page

To Previous Page

ENGLISH

Changing the aspect ratio

You can select an appropriate aspect ratio for the playback video signals.

Basic procedure

Each time you press the button, aspect ratio change.

Changeable aspect ratio

When incoming 16:9 video signal:

FULL:

Pictures are fully shown on the screen.

• In some cases, the black bars may be shown at the top and

bottom sides of the screen.

NORMAL:

Pictures are reduced horizontally.

• The black bars will be shown at the left and right sides of

the screen.

• In some cases, the black bars may be shown also at the top

and bottom sides of the screen.

JUST:

The middle of pictures are reduced horizontally, and the left

and right side of the picture enlarged horizontally.

• In some cases, the black bars may be shown at the top and

bottom sides of the screen.

ZOOM:

Pictures are enlarged on the screen so that no black bars will

be shown on the screen. (The entire picture cannot be shown

on the screen.)

ASPECT

To be continued....

EN11-16_KV-MRD900[E]f.indd 15EN11-16_KV-MRD900[E]f.indd 15 05.3.19 0:23:20 PM05.3.19 0:23:20 PM

Questions and Answers:

Need help?

Do you have a question about the JVC KV-MRD900 and is the answer not in the manual?

JVC KV-MRD900 Specifications

General