M
Matthew GardnerSep 5, 2025
What does “No Data” mean on JVC KW-ADV64BT?
- RRobyn EdwardsSep 5, 2025
The message “No Data” on your JVC Receiver means that no phone book data is contained in the connected Bluetooth phone.
To Next PageTo Next PageWhat does “No Data” mean on JVC KW-ADV64BT?
The message “No Data” on your JVC Receiver means that no phone book data is contained in the connected Bluetooth phone.
What to do if the JVC Receiver remote controller does not work?
If the remote controller for your JVC Receiver is not working, replace the battery.
What does 'Pairing Error' mean on my JVC Car Video System?
If your JVC Car Video System shows a 'Pairing Error', it means that pairing between the unit and the Bluetooth device has failed. Try registering the device again.
What does 'Connection Error' mean on my JVC Car Video System, and how to fix it?
If your JVC Car Video System displays a 'Connection Error', it indicates that the device is registered but the connection has failed. Connect the registered device.
What to do if my JVC KW-ADV64BT shows “USB Device Error”?
If your JVC Receiver displays a “USB Device Error”, the USB power voltage might be abnormal. Try turning the unit off and then on again. If the issue persists, connect a different USB device.
Why does my JVC KW-ADV64BT Receiver say “MISWIRING Check wiring connection then reset unit”?
This message on your JVC Receiver indicates that a speaker cord has shorted or is in contact with the car chassis. You should wire or insulate the speaker cord as needed, and then reset the unit.
What does “Pick Up Error” mean on JVC KW-ADV64BT?
If your JVC Receiver shows “Pick Up Error”, the unit has failed to receive a call.
What does “Initialize Error” mean on JVC Receiver?
If your JVC Receiver shows “Initialize Error”, the unit has failed to initialize the Bluetooth module. Try the operation again.
What does “No Voice Device” mean on JVC Receiver?
The message “No Voice Device” on your JVC Receiver means that the connected mobile phone does not have the voice recognition system.
How to stop “Now Reading...” flashing on JVC KW-ADV64BT?
If “Now Reading...” keeps flashing on the screen of your JVC Receiver, turn the power off and on again.
General| Category | Receiver |
|---|---|
| DIN Size | Double DIN |
| Display Type | LCD |
| Monitor Size | 6.8 inches |
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Port/Input | Yes |
| AUX Input | Yes |
| DVD Playback | Yes |
| RMS Power Output | 22 watts |
| Peak Power Output | 50 watts |
| Equalizer | 13-band graphic equalizer |
| Steering Wheel Control Compatible | Yes |
| Rear View Camera Input | Yes |
| AM/FM Tuner | Yes |
| Wireless Remote Control | Yes |
| Apple CarPlay | Yes |
| Android Auto | Yes |
| Preamp Outputs | 3 |
| Power Output | 50 watts x 4 channels |
| Audio Formats Supported | MP3, WMA, AAC, WAV |
| Video Formats Supported | AVI |
How to choose and switch between different audio/video sources.
General instructions for playing discs.
Controls and functions for playing various media types from discs.
Controls and functions for playing audio files from discs.
How to play media files from a connected USB device.
Controls and functions for playing media from USB devices.
Selecting how the iPod/iPhone is controlled (unit or device).
Using iPod/iPhone playback features in "Head" control mode.
Using iPod/iPhone playback features in "iPod Out" mode.
Instructions for tuning and selecting SiriusXM channels.
Setting parental controls and channel restrictions.
Steps to activate and configure the parental lock feature.
How to set or change the parental control code.
Adjusting sound settings using equalization options.
Fine-tuning sound settings like frequency, Q, and bass.
Setting crossover frequencies for speakers and subwoofer.
Adjusting video picture quality like brightness and contrast.
Enabling the rear view camera display.
Automatic display of the rear view camera when reversing.
Enabling rear view camera display when shifting to reverse.
Saving and recalling custom unit configurations.
Updating the unit's software using a USB device.
Selecting input source for external components or iPod/iPhone.
Steps for pairing and connecting new Bluetooth devices.
Connecting to or disconnecting previously paired Bluetooth devices.
Managing phone calls, volume, and mode switching via Bluetooth.
Accessing and using stored phone numbers and call history.
Transferring phone book entries from a mobile phone to the unit.
Playing audio from a Bluetooth-enabled device.
Configuring Bluetooth settings for mobile phones and audio players.
Initial pairing process for Bluetooth devices.
Handling incoming calls via Bluetooth.
Procedures for making calls via Bluetooth.
Mobile phone operations via Bluetooth for KW-AV60.
Playing audio from a Bluetooth device for KW-AV60.
Continued list of remote controller button functions.
Troubleshooting common error messages and their causes/remedies.
Troubleshooting common issues related to sound and display.
Troubleshooting issues specific to iPod/iPhone connectivity and playback.
Troubleshooting SiriusXM radio specific messages and issues.
Troubleshooting Bluetooth connectivity and audio playback issues.
Troubleshooting issues specific to the tuner function.
Troubleshooting problems with AV-IN connections.
Troubleshooting general disc playback problems.
Troubleshooting problems related to USB device usage.
Step-by-step guide for installing the unit into the dashboard.
How to connect the parking brake signal wire.
Connecting the unit to the car's steering wheel remote control.
Connecting external amplifiers and a subwoofer for enhanced audio.
Connecting the external microphone to the unit.
Preparatory steps and precautions before unit installation.
How to connect the reverse gear signal for the rear view camera.
Connecting iPod or iPhone devices for audio/video playback.
Using the KS-U30 cable for audio/video playback from iPhone/iPod.
Connecting iPhone/iPod via 30-pin USB cable for audio playback.
