To Next PageTo Next PageWhy is my JVC Car Video System showing a restricted device error?
If your JVC Car Video System displays a 'Restricted Device' error, verify that the connected iPod/iPhone is compatible with the unit.
Why does my JVC Car Video System say 'No Data'?
If your JVC Car Video System displays 'No Data', it indicates that no phone book data is contained in the connected Bluetooth phone.
What does “No Data” mean on JVC KW-AV60BT Receiver?
The message “No Data” on your JVC Receiver means that no phone book data is contained in the connected Bluetooth phone.
What does 'Connection Error' mean on my JVC Car Video System, and how to fix it?
If your JVC Car Video System displays a 'Connection Error', it indicates that the device is registered but the connection has failed. Connect the registered device.
What to do if my JVC Receiver shows “USB Device Error”?
If your JVC Receiver displays a “USB Device Error”, the USB power voltage might be abnormal. Try turning the unit off and then on again. If the issue persists, connect a different USB device.
Why does my JVC Receiver say “MISWIRING Check wiring connection then reset unit”?
This message on your JVC Receiver indicates that a speaker cord has shorted or is in contact with the car chassis. You should wire or insulate the speaker cord as needed, and then reset the unit.
How to troubleshoot “No Signal” on JVC Receiver?
If your JVC Receiver displays a “No Signal” message, start playback on the external component connected to the VIDEO IN jack. Also, check the cords and connections. The signal input might be too weak.
What does 'Initialize Error' mean on my JVC Car Video System, and how to fix it?
If your JVC Car Video System displays an 'Initialize Error', it means the unit has failed to initialize the Bluetooth module. Try the operation again.
What does 'USB Device Error' mean on my JVC Car Video System, and how to fix it?
A 'USB Device Error' on your JVC Car Video System suggests that the USB power voltage is abnormal. Try turning the unit off and then on again. If that doesn't work, connect a different USB device to see if the issue persists.
What does “Initialize Error” mean on JVC KW-AV60BT?
If your JVC Receiver shows “Initialize Error”, the unit has failed to initialize the Bluetooth module. Try the operation again.
Instructions for safely removing and attaching the detachable monitor panel.
Procedure for powering the unit on.
Instructions for turning the display screen off.
Procedure for powering the unit off.
Methods for controlling the audio volume level.
Guide to choosing and switching between different audio/video sources.
How to view detailed information about the currently tuned radio station.
Steps to manually store favorite radio stations into memory presets.
Instructions for playing discs and basic playback controls.
Procedure for removing a disc from the unit.
Information and steps for playing media from a USB storage device.
How to connect USB devices like memory sticks or players.
Instructions for connecting your iPod or iPhone using various cables.
Configuring the unit's AV Input setting for iPod/iPhone connection.
Steps required before using iPod touch/iPhone apps with the unit.
Enabling iPod/iPhone display to show control buttons for switching.
Steps needed before operating Pandora internet radio.
Instructions for connecting and using the front AUX input.
Connecting and using external components via AV-IN jacks.
Steps to activate SiriusXM Satellite Radio subscription.
Guide to selecting and tuning into channels on SiriusXM radio.
How to set up parental controls to restrict channel access.
Procedure to activate the parental lock feature.
How to configure the unit to skip specific unwanted channels.
Explanation of sound equalization settings and how to use them.
Guide to choosing and applying pre-defined sound modes.
How to save custom sound settings.
How to select and adjust colors for display elements.
Guide to adjusting picture quality settings like brightness and contrast.
Steps to enable and use the rear view camera functionality.
Adjusting front/rear and left/right speaker output balance.
Adjusting sound modes and equalization settings.
Activating or deactivating loudness enhancement.
Adjusting the crossover frequency for speakers and subwoofer.
Setting auto-adjustment volume levels for different sources.
Procedure to save current unit settings to a user profile.
How to load previously saved settings from a user profile.
Steps to delete saved user profile settings.
General information and compatibility notes for Bluetooth devices.
Specific Bluetooth functions for these models.
Procedure for pairing a new Bluetooth device with the unit.
How the unit handles incoming calls.
How to adjust microphone volume during calls.
Unit's notification system for received text messages.
Bluetooth mobile phone operations specific to KW-AV60.
Bluetooth audio player operations specific to KW-AV60.
Instructions on how to install and operate the remote controller.
How to navigate and use the disc menu for playback.
Warnings regarding safe cleaning methods for the unit.
Proper procedures for handling and storing discs.
Recommendations for maintaining disc cleanliness for optimal playback.
Details on supported file formats for playback.
Specifications and notes for playing DivX files from discs.
Specifications and notes for playing MPEG1/MPEG2 files.
Specifications and notes for playing JPEG image files.
Specifications and notes for playing MP3, WMA, and WAV files.
General| Resolution | 800 x 480 |
|---|---|
| Bluetooth | Yes |
| USB Port | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| Power Output | 50W x 4 |
| DVD Player | Yes |
| Steering Wheel Control Ready | Yes |
| AUX Input | Yes |
| CD Playback | Yes |
| Radio Tuner | AM/FM |
| Video Output | Yes |
| Remote Control | Yes |
| Video Formats Supported | MPEG1 / MPEG2 |
| Preamp Outputs | 3 Pairs (Front, Rear, Subwoofer) |
| Equalizer | 13-band |
