JVC KW-AV71BT - Page 50

50
ENGLISH
Menu item Selectable setting/item Initial: Underlined
Display
Dimmer z Auto
z On
z Off
z Dimmer
Time Set
: Dims the screen and button illumination when you turn
on the headlights.
• The ILLUMI lead connection is required. (
Installation/Connection Manual)
: Activates dimmer.
: Cancels.
: Sets the Dimmer On (
)/Off ( ) times.
• Press [5] or [∞] to set the time.
Display Design Change the display design (background, text color and touch panel button
color). ( page 44)
OSD Clock
z On
z Off
: Displays the clock while a video source is played back.
: Cancels.
Demonstration
z On
z Off
: Activates the demonstration on the screen.
: Cancels.
Scroll
z Auto
z Once
z Off
: Repeats scrolling.
: Scrolls the displayed information once.
: Cancels.
• Touching the information bar scrolls the text regardless of this setting.
GUI Adjust Adjust the brightness and blackness of the screen.
Press [Enter] to display the setting screen, select [ ] (dimmer on)/[ ]
(dimmer off), then change the following settings:
z Brightness
z Black
: Adjusts brightness (–15 to +15; Initial 00 for Dimmer
On/+15 for Dimmer Off).
: Adjusts blackness (–15 to +15; Initial 00).
NTSC/PAL*
1
Select the color system of the external monitor.
z NTSC, PAL
Display Sensor Change the settings of how to display the buttons, the sensitivity of the
motion sensor, and how the screen is changed when no operation is
performed for a while. ( page 11)
Input
AV Input*
2
*
3
You can determine the use of LINE IN/VIDEO IN jacks.
z AV-IN*
4
: Select to use the external component connected to
LINE IN/VIDEO IN jacks or the iPod/iPhone connected by
using USB 2.0 cable ( pages 28 and 36)
z iPod : Select to use the iPod/iPhone connected by using JVC
KS-U30. ( page 28)
*
1
“Please Power Off” appears when the setting is changed. Turn off the power, then turn on to enable the change.
*
2
To change the setting, turn off the AV source by pressing [AV Off] on the <HOME> screen and select “ AV Off ” as
the rear source beforehand. <AV Input> can be changed only when <Input> in <Navigation Input> is set to
[ Off].
*
3
When <AV Input> is set to [AV-IN], the video from iPod/iPhone is not displayed on the screen.
*
4
The initial setting is [iPod] for Region 1 models, and <AV-IN> for Region 4 models.
EN_KW-AV71JJW.indb 50 12/11/02 10:03