EasyManua.ls Logo

JVC KW-AVX836 - Sound Settings Menu

JVC KW-AVX836
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
Menu item Selectable setting/item
Initial: Underlined
Fader/Balance
Fader/Balance
Reset
Fader 0
Balance 0
Back
Exit
Fader : Adjust the front and rear speaker output balance.
F6 to R6; Initial 0
When using a two-speaker system, set the fader to the center (0).
Balance : Adjust the left and right speaker output balance.
L6 to R6; Initial 0
Press [ 5//2/3 ] or drag [ ] to adjust.
To clear the adjustment, press [Reset].
Volume Adjust *
4
Adjust and store the auto-adjustment volume level for each source, comparing
to the FM volume level. The volume level will automatically increase or decrease
when you change the source.
• <Fix> appears if an FM broadcast is selected as the source.
–12 to +12; Initial 00
Subwoofer Level Adjust the subwoofer output level.
00 to 08; Initial 08
High Pass Filter
Through
On
: Select when the subwoofer is not connected.
: Select when the subwoofer is connected.
Low Pass Filter Select the crossover frequency between the front/rear speakers and the subwoofer.
55Hz, 85Hz, 120Hz
Amplifier Gain You can change the maximum volume level of this unit.
Off
Low
High
: Deactivates the built-in amplifier.
: VOL 00 to 30 (Select this if the maximum power of the
speakers is less than 50 W.)
: VOL 00 to 50
If you change the setting from <High> to <Low> while the volume level is set
higher than “VOL 30, the unit automatically changes the volume level to “VOL
30.
Loudness You can activate/deactivate the loudness function.
Off
On
: Cancels.
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
Rear Speaker *
5
You can activate/deactivate the rear speakers.
This setting takes effect only when Dual Zone is activated. ( 23)
Off
On
: Deactivate the rear speakers.
: Activate the rear speakers.
*
4
For “
DISC/USB
”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG
Audio and the others.
*
5
Only for KW-AVX836/KW-AVX835.
Sound
EN_KW-AVX836[U]3.indb 30EN_KW-AVX836[U]3.indb 30 10.1.16 5:19:05 PM10.1.16 5:19:05 PM

Other manuals for JVC KW-AVX836

Related product manuals