J
Julia ComptonSep 9, 2025
What does "Mecha Error Push Reset" mean on my JVC KW-AVX838 Car Receiver?
- SshieldssarahSep 10, 2025
If the JVC Car Receiver displays "Mecha Error Push Reset" and the panel does not move, reset the unit.
To Next PageTo Next PageWhat does "Mecha Error Push Reset" mean on my JVC KW-AVX838 Car Receiver?
If the JVC Car Receiver displays "Mecha Error Push Reset" and the panel does not move, reset the unit.
How to fix "Acquiring Signal" on JVC KW-AVX838 Car Receiver?
If "Acquiring Signal" or "NO SIGNAL" appears on the screen of your JVC Car Receiver, move to an area with stronger signals.
What does "Position Error Push Open Key" mean on JVC Car Receiver?
If the JVC Car Receiver displays "Position Error Push Open Key", and it is because the monitor panel angle has been forcibly adjusted, or its adjustment has been interrupted while opening or closing, press, then [Open].
How to fix no sound on my JVC Car Receiver?
If no sound is coming from the speakers of your JVC Car Receiver, try the following: * Adjust the volume to the optimum level. * Check the cords and connections to ensure they are properly connected. * Note that DTS sound cannot be reproduced through any terminals (Speaker out/REAR OUT/FRONT OUT).
What does "Eject Error" mean on my JVC KW-AVX838 Car Receiver?
If "Eject Error" or "Loading Error" appears on the screen of your JVC Car Receiver, eject the disc forcibly or check the disc.
Why can't I control my audio player with my JVC KW-AVX838?
If the connected audio player cannot be controlled via your JVC Car Receiver, check whether the connected audio player supports AVRCP (Audio Video Remote Control Profile).
Why is the lighting sensor not working on my JVC KW-AVX838 Car Receiver?
If the function does not work properly on your JVC Car Receiver, it may be because the lighting sensor may malfunction when there is an object close to the Prox./Motion sensor. Select for .
Why don't the buttons work on my JVC KW-AVX838 monitor panel?
If the buttons on the monitor panel of your JVC Car Receiver do not work, note that when the monitor panel is open, only VOL +/– work. The other buttons do not function.
How to reduce static noise on JVC KW-AVX838 Car Receiver radio?
If static noise occurs while listening to the radio on your JVC Car Receiver, connect the antenna firmly.
How to improve screen clarity on JVC Car Receiver?
If the screen of your JVC Car Receiver is not clear and legible, and it might be caused by sunshine from the windshield, adjust the Bright setting in the Picture Adjust menu.
General| Bluetooth | Yes |
|---|---|
| USB Port | Yes |
| Power Output | 50 watts x 4 channels |
| Preamp Outputs | 3 pairs (front, rear, subwoofer) |
| Touchscreen | Yes |
| DVD Player | Yes |
| iPod Compatibility | Yes |
| HD Radio | No |
| SiriusXM Ready | Yes |
| CD Playback | Yes |
| AM/FM Tuner | Yes |
| Built-in Amplifier | Yes |
| Video Output | Yes |
| Outputs | Preamp outputs, video output |
| iPhone Compatibility | Yes |
| Remote Control | Yes |
| Display Size | 7-inch |
| Audio Formats Supported | MP3, WMA |
| Video Formats Supported | MPEG-4, WMV |
| RMS Power Output | 22W x 4 |
| Peak Power Output | 50 Watts x 4 Channels |
| Inputs | USB, Auxiliary |
| Resolution | 800 x 480 pixels |
