JVC KW-M730BT - User Interface Setup

Setting Up
65English
User Interface Setup
You can setup user interface parameters.
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [ ].
 HOME screen appears.
3
Touch [ ].
 SETUP screen appears.
4
Touch [User Interface].
 User Interface screen appears.
5
Set each item as follows.
■ Beep
Turns the key touch tone on or off.
Default is “ON”.
■ Parking Assist Display
When an ADS adapter is connected, you can
display information about obstacles around
the car.
ON: Always displays information.
Dyn. (Default): Displays information when
the sensor detects obstacles.
OFF: Cancels.
This can be set when the iDataLink
(commercially available) is connected.
■ Parking Assist Position
Select where information about obstacles is
displayed on the screen (left or right).
“Left”/ “Right” (Default)
This can be set when the iDataLink
(commercially available) is connected.
■ Language Select
Selects a language.
■ Touch Panel Adjust
Adjust the sensing position of touch panel.
(P.66)
■ Clock
GPS-SYNC (Default): Synchronizes the clock
time with the GPS.
Manual: Sets the clock manually
■ Time Zone
Select the time zone.
■ Clock Adjust
If you select [Manual] for Clock, adjust the
date and time manually. (P.65)
■ [DISP Key]
Select the source screen displayed when
on the popup menu screen is pressed.
Apps: Switches to the App screen from the
connected iPod touch/iPhone/Android
device or Apple CarPlay screen from the
connected iPhone by pressing the button.
(P.27)
OFF (Default): Displays the control screen of
current source.
Ñ Adjust the date and time
manually.
1
Touch [Time Zone] in the User Interface
screen.
2
Select the time zone.
3
Touch [Clock Adjust] in the User Interface
screen.
4
Adjust the date, then adjust the time.
5
Touch [Set].
!B5A-1733-00_17KWV-K_En.indb 65 2016/12/28 11:25