L
Lori SanchezSep 13, 2025
What to do if broadcast data is interrupted in iHeartRadio on JVC KW-R710?
- AAlan CollinsSep 13, 2025
If the broadcast data is interrupted, retry connecting.
To Next PageTo Next PageWhat to do if broadcast data is interrupted in iHeartRadio on JVC KW-R710?
If the broadcast data is interrupted, retry connecting.
What does “MISWIRING CHK WIRING THEN RESET UNIT” mean on my JVC KW-R710 and what should I do?
This message indicates a wiring issue. Check that the terminals of the speaker wires are properly insulated. After checking the wiring, reset the unit.
Why is the iPod/iPhone not turning on or not working with my JVC Car Receiver?
If your iPod/iPhone is not turning on or working, first check the connection between the unit and your device. If the connection is secure, try detaching and resetting the iPod/iPhone using a hard reset.
Why correct characters are not displayed on JVC Car Receiver?
The unit can only display uppercase letters, numbers, and a limited number of symbols.
What to do if registration of Thumbs Up/Down has failed in iHeartRadio on JVC Car Receiver?
If registration of Thumbs Up/Down has failed, retry registering Thumbs Up/Down.
What to do if communication is unstable in Pandora on JVC KW-R710?
If communication is unstable in Pandora, retry connecting.
Why is addition to the favorite category failing in iHeartRadio on my JVC KW-R710?
If adding to the favorite category fails, retry adding to the favorite category.
What to do if the connection to the device in iHeartRadio should be checked in JVC Car Receiver?
If you're prompted to check the connection to the device, ensure the device is properly connected.
What to do if registration of thumbs up/thumbs down has failed in Pandora on JVC KW-R710 Car Receiver?
If registration of thumbs up/thumbs down has failed, retry registering thumbs up/thumbs down.
Why does “READING” keep flashing on my JVC Car Receiver?
If “READING” keeps flashing, avoid using too many hierarchical levels and folders. You can also try reloading the disc or reattaching the USB device.
General| Audio system | MOSFET |
|---|---|
| MP3 playback | Yes |
| Audio formats supported | MP3, WAV, WMA |
| AM band range | 531 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | FM, LW, MW |
| Preset stations quantity | 24 |
| DIN size | 2 DIN |
| Product color | Black |
| Audio output channels | 4.0 channels |
| Equalizer bands quantity | 12 |
| Maximum power per channel | 50 W |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| Bluetooth | No |
| USB version | 2.0 |
| USB ports quantity | 1 |
Weight and Dimensions| Weight | 1500 g |
|---|
Provides crucial warnings and cautions for safe operation and handling of the unit and its components.
Methods for selecting specific tracks, files, or folders for playback from connected media.
Guidance on selecting tracks or files from lists and searching for songs by name.
Explains automatic and manual tuning for finding radio stations.
How to use controls like pause, skip, thumbs up/down for Pandora.
How to use controls like pause, skip, and thumbs up/down for iHeartRadio.
Instructions for creating and storing personalized equalizer settings.
Solutions for sound issues, wiring problems, and source selection errors.
Troubleshooting steps for poor radio reception and incorrect character display.
Resolving issues related to disc ejection, playback order, and unsupported tracks.
Common error messages encountered with Pandora and their corresponding solutions.
Common error messages encountered with iHeartRadio and their corresponding solutions.
Important safety warnings and cautions to observe during unit installation.
List of installation parts and the basic procedure for mounting the unit in-dash.
Illustrates the overall wiring connections between the unit, vehicle, and other components.
Details on recommended connections for power, speakers, antenna, and remote wires.
Steps for correctly connecting the ground wire and other unit wires.
Instructions for connecting the antenna terminal and power cord to the unit.
