36
ENGLISH
Using information service (Only for KW-NT50HDT)
On the map
1 Touch the traffic icon.
2
• If there are several POIs on the selected position,
select one from the list.
– The list appears only when <POI Icon> is set
to <On>. (☞ page 15)
The icons of traffic alert which are not on your route are
shown in gray when all the information is displayed.
From <Traffic List>
1
2 Select a list (1), then a traffic alert (2).
[All]: Lists all the information.
[On Route]: Lists the information on your route.
Details of the selected alert are displayed.
List of traffic icons
Traffic jam Narrow lanes Other caution event
Roadworks Accident
Information
Road is blocked or closed Condition
Checking the traffic information
This function is available on KW-NT50HDT only, not equipped with on KW-NT30HD.
EN_KW-NT30_50[J].indb 36 2/3/2011 9:27:44 AM
To Next Page
Loading...
