JVC KW-NT50HDT - Rear View Camera Operations; Using a Rear View Camera; Activating the Rear View Camera; Displaying the Picture from the Rear View Camera

ENGLISH
87
Using a rear view camera
• To use a rear view camera, the reverse gear signal lead connection is required. For connecting a rear view camera,
☞ Installation/Connection Manual.
Activating the rear view
camera
1
2
3
To deactivate the rear view camera, select <Off>
for <Camera Input>.
Rear View Camera Operations
Displaying the picture from the
rear view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
To display the operating buttons, touch the screen.
[
]
Hides/displays the operating buttons
on the screen.
[
]
Adjusts the picture. (☞ page 72)
[Bottom][Top] Adjusts the position of the caution
message.
Caution message
EN_KW-NT30_50[J].indb 87 2/3/2011 9:28:09 AM