JVC KW-NX7000 - Page 4

4
9
Press [OK] to open the monitor panel.
10 Remove the update SD card.
11 Close the front panel.
If you continue the update to “Part 2: Updating the map data”, press [OK] without closing the slot
cover, though the message for closing the slot cover appears.
• If you want to update the map data later, attach the SD slot cover detached on step
6 of “Part 1:
Updating the software”, then press [OK].
A confirmation message appears. Press [Yes] to confirm the operation.
NX7000update[E].indb 4NX7000update[E].indb 4 09.11.4 10:52:01 AM09.11.4 10:52:01 AM