JVC KW-NX7000 User Manual

Starting guidance
• You can display the map of selected area on
whole screen by touching the map part once. (If
you press more tha n once, the map scrolls.) To
display above screen again, press [Select].
oc:::::::::::::
The System starts calculating the route to the
selected destination, and guidance starts.
1
Distance and direction from your position
Information on the cursor-pointed position
• If there are several POls on the selected position,
select one from the list.
- The list appears only when <POI Icon> is set
to <On>. (1& page 51)
2
Setting a destination on the map _
1 Touch the position where you want to select
as a destination. (1& page 20)
Cancels the calculation
After pressing [Select] on the map screen, you can do various
operations by pressing one of the buttons on the next screen.
Available buttons vary according to the type of the selected position
and the navigation status.
[Go]: Starts gUidance to a position. (1& above)
[Replace]: Changes the destination to the selected position.
[Save]: Saves a position as a favorite point. (1l'W page 22)
[Edit]: Edits the information of a position. (1& page 23)
[Add]: Adds a position to via points. (1l'W page 43)
[Options]: Modifies the route options. (1l'W page 27)
25
NAVIGATION SYSTEM

JVC KW-NX7000 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Display diagonal	7 \
Display resolution	336 x 960 pixels