JVC KW-NX7000 User Manual

• You can display the map of selected area on
whole screen by touching the map part once. (If
you press more than once, the map scrolls.) To
display above screen again, press [Select].
3
2 Select a place from the list of the previous
destinations/via points.
From previous destinations
<Previous> _
You can select a place from the last SO destinations and
via points.
1
T
Moves to the next/previous list
• You can also select the center of the street or an
intersection on the street by pressing [Middle of
the Road] or [Intersection].
- When selecting intersection on the street,
specify the crossing street after pressing
[Intersection].
• If no data of house number for the selected
street is available in the database, this step is
skipped.
5
4
Enter the house number, then select from
the list.
• You can display the map of selected area on
whole screen by touching the map part once. (If
you press more than once, the map scrolls.) To
display above screen again, press [Select].
Continued on the next page
35
NAVIGATION SYSTEM

JVC KW-NX7000 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Display diagonal	7 \
Display resolution	336 x 960 pixels