JVC KW-NX7000 User Manual

QuickSearch _
Continued on the next page
4 Repeat steps 1 to 3 until three categories
are registered.
The selected category (or sub-category) name is
assigned to the button.
To change a category assigned to the
Quick Search button
1 Select one of the [Quick Search] buttons
whose category you want to change.
Sub-categories
Searches from all sub-categories
Moves to the next/previous list of sub-categories
oc:::::::::::::
The search for the selected category starts to
register it to the [Quick Search] button.
2 Select a category, then a sub-category of the
POI.
To register a category to the buttons
1 Select one of the [Quick Search] buttons to
register the category.
You have three [Quick Search] buttons in 3
<Destination Menu>. You can assign a POI category
to each button. When you press one of the buttons, the
System searches for a POI of the registered category
within about 12.5 mi (20 km) around your current
position.
37
NAVIGATION SYSTEM

JVC KW-NX7000 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Display diagonal	7 \
Display resolution	336 x 960 pixels