JVC KW-NX7000 User Manual

Function Menu-Map Settings
Initial: Underlined
Selectable settings, [reference pagel
Fastest: The System calculates the shortest journey time.
Shortest: The System calculates the shortest route to the destination .
• This setting is effective next time the System calculates a route.
Select whether to use or avoid these types of roads to go to the
destination.
Use, Avoid
• These settings are effective next time the System calculates a route.
Auto, Manual, Off IrE [46]
Select the type of attention tone, which comes out before voice guidance.
A.I., Prompt, Normal, Off
Adjust the volume of the voice guidance.
00 to 10 (~)
When this function is activated, the System automatically increases the
guidance volume level as the car speeds up.
Max, Mid, Min, Off
Select the guidance output channel.
L ch., L+R ch., R ch.
You can turn down the volume of the AV source while voice guidance is
produced.
Mute: The AV source sound does not come out.
Att.: The AV source sound is lowered.
Normal: The AV source sound is not affected.
The System sounds an alarm when you surpass the speed limit of the
current road by the set value.
20 mph, lS mph, 10 mph,6 mph, 3 mph, Off
Alert sounds when you approach a POI ofthe selected category.
• To select categories for POI alert, press [Edit], then select categories and
sub-categories (the selected items are marked with "...j"). To activate POI
alert for selected categories, press [On]. To deactivate it, press [Off] ..
- You can select up to 3 categories.
*1 When adjusting these items, test tone is produced.
so

JVC KW-NX7000 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Display diagonal	7 \
Display resolution	336 x 960 pixels