JVC KW-NX7000 User Manual

Disc operations
The disc type is automatically detected, then playback starts (for some discs, the top menu of the disc appears).
If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
• Open the monitor panel.
~I IJI
OO~ c::::J o.JVCo c=J~t~._TlLTDJ
'" - -' -
~d~i1:",0 ~
<OpenlTilt> menu is displayed.
• By pressing and holding the button, you can
open the monitor panel and eject the disc.
8..,.
• Insert a disc.
label side
Monitor panel closes automatically.
If not, press [Close].
Do not place your finger behind the monitor panel.
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
When playing back a multi-channel encoded disc, the multi-channel signals are down mixed .
• You can fully enjoy multi-channel sound by connecting an amplifier or a decoder compatible with these multi-
channel sources. (1G1" also page 117)
63
AV OPERATIONS

JVC KW-NX7000 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Display diagonal	7 \
Display resolution	336 x 960 pixels