JVC KW-NX7000 User Manual

SO operations
This unit can play the JPEG/MP3/WMAlWAV/AAC*
files stored in SD card.
• You can operate the SD card in the same way you
operate the files on discs. (1& pages 66 to 70, 73 and
74)
• All tracks in the SD card will be played repeatedly
until you change the source.
• Make sure all important data has been backed up.
o Open the monitor panel.
~ 00 c==::::l c:J 0 JVC 0 c=J c==::J 01
~
<Open/Tilt> menu is displayed.
• Insert an SD card.
Push in the SD card until you hear a clicking sound.
The source changes to "SD" and playback starts.
1-
• If <Open/Tilt> menu is not displayed:
[Twice]
You can also press [Close]
on <Open/Tilt> menu.
• Close the monitor panel.
• If <Open/Tilt> menu is still displayed:
* This unit can play back AAC files encoded using
iT unes. This unit cannot play back FairPlay-encrypted
files.
•
Do not place your finger behind the monitor panel.
To eject the SD card
Push in the SD card lightly.
• You can also eject the SD card by holding OPEN (when
the monitor panel is closed).
• Do not release your finger qUickly; otherwise, the
SD card may pop up out from the loading slot.
78

JVC KW-NX7000 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Display diagonal	7 \
Display resolution	336 x 960 pixels