When you press or hold the following button(s)...
Control panel
Remote
controller
General function
SOURCE
—
Turns on.
Turns off. (Hold)
Press the SOURCE button on the control panel and turn
the control dial within 2 seconds to select the source.
SOURCE Press repeatedly to select the source.
Control dial
(turn)
VOL - / + Adjusts the volume level.
— Selects items.
Control dial
(press)
)
Mutes the sound or pauses playback.
Press the button again to cancel muting or resume
playback.
— Confirms selection.
—
Enters <BRIGHTNESS> menu directly. (KW-R400 only)
(' page 14)
iPod — Switches to iPod source. (KW-R500 only)
Number
buttons
(1 - 6)
—
Selects the preset stations.
Stores the current station into the selected number button.
(Hold) (' page 8)
EQ SOUND
Selects the preset sound mode. (' page 14)
—
Activates/deactivates TA Standby Reception. (' page 9)
Enters PTY Search mode. (Hold) (' page 9)
Returns to the previous menu.
Exits from the menu. (Hold)
/ /
Selects a preset station. (' page 8)
Selects MP3/WMA folder. (' page 10)
/
/
Searches for a station automatically. (' page 8)
Searches for a station manually. (Hold)
Selects track. (' page 10, 11)
Fast-forwards or reverses track. (Hold)
.
KW-R400 can be remotely controlled as instructed here (with an optionally purchased remote
controller). We recommend that you use remote controller RM-RK52 with your unit.
Basic operations
ENGLISHޓ|
7
2011/12/13ޓ2:37:15KW-R500_E_EN
To Next Page
Loading...
