JVC KW-R510

16
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
STEERING
WHEEL
REMOTE
KW-R710 KW-R510
Wiring connection
Light blue/yellow
Signal cord
(not supplied)
Remote wire (not supplied)
To the steering
wheel remote
control adapter
Fuse (10A)
To Blue/white wire of the
wiring harness
(C)
Aerial terminal
JVC Amplifier
Rear/subwoofer output
IMPORTANT: A custom wiring harness (separately purchased)
which is suitable for your car is recommended for connection.
If your car does NOT have an ISO terminal
( or )
ISO connector
* Custom wiring harness (separately purchased)
For some VW/Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
power cord
(C) as illustrated.
If the unit does not turn on with modified wiring 1, use
modified wiring 2 instead.
Y: Yellow R: Red
Original wiring
Modified wiring 1
Modified wiring 2
Pin Color and function
A2 Brown : Tel muting
A4 Yellow : Battery
A5 Blue/White : Power control
A6 Orange/white : Car light control switch
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
B1
Purple
: Rear speaker (right)
B2
Purple/black
B3
Gray
: Front speaker (right)
B4
Gray/black
B5
White
: Front speaker (left)
B6
White/black
B7
Green
: Rear speaker (left)
B8
Green/black
Front output
Rear/subwoofer output
INSTALLATION / CONNECTION
JS_JVC_KW-R710_E_02_EN.indd 16JS_JVC_KW-R710_E_02_EN.indd 16 11/25/2013 3:48:53 PM11/25/2013 3:48:53 PM