JVC KW-V31BT - DISCS; DISC PLAYBACK SETTINGS; PARENTAL LOCK SETUP

ENGLISH 13
DISCS
DISCS
Settings for disc playback
• Available items shown on the <Mode> screen
differ depending on the type of disc/file being
played back.
 Setting items
<Menu
Language>*
Select the initial disc menu language.
(Initial: English ) (Page62)
<Subtitle>* Select the initial subtitle language or
turn subtitles off (Off). (Page62)
• Initial for KW-V51BT Region 1/
KW-V31BT Region 1: Off, for
KW-V51BT Region 4/KW-V31BT
Region 4: English
<Audio
Language>*
Select the initial audio language.
(Initial: Original ) (Page62)
<D.Range
Compres.>*
You can change the dynamic range
while playing using Dolby Digital
software.
• Off: Select this to enjoy a powerful
sound at a low volume level with
its full dynamic range.
• On (Initial): Select this to reduce
the dynamic range a little.
• Dialog: Select this to reproduce
movie dialog more clearly.
<Angle
Mark>
Select whether to display the angle
mark.
• On (Initial): Select this to display
the angle mark.
• Off: Select this to hide the angle
mark.
<Monitor
Type>*
Select the monitor type to watch a
wide screen picture on the external
monitor.
16:9
(Initial)
4:3 LB 4:3 PS
<Parental
Level>*
Set the parental lock.
(See the right column.)
<CD Read> Select the files to play on a disc
containing music files. You cannot
change the setting when a disc is
inserted.
• 1 (Initial): Automatically
distinguishes between audio file
discs and music CDs.
• 2: Forcesto play as a music CD. No
sound can be heard if an audio file
disc is played.
* You can change these settings only while playback is stopped.
Setting the parental lock
The parental lock cannot be set during DVD
playback.
1 Display the <Parental Pass Check>
screen.
On the <Mode> screen:
2 Enter the 4-digit parental pass code (1),
and press [Enter] (2).
• To clear the entry, press [Clear].
3 Adjust the parental level ([Off], [1] to [8]).
KW-VMidJ.indb13 2014/12/0520:11