SETTINGS
Adjusting the crossover frequency
1 Display the <Crossover> screen.
On the Home screen:
2 Select the item to adjust (1), then make
adjustments (2).
<HPF> Adjusts the crossover for the
front ([Front]) or rear ([Rear])
speakers (high pass filter).
<LPF> Adjusts the crossover for the
subwoofer (low pass filter).
<SW Level> Adjusts the subwoofer level.
<Phase> Selects the phase for the
subwoofer.*
<Freq> Adjusts the crossover frequency.
* Not selectable when <Freq> is set to <Through>.
Adjustment for video playback
Adjusting the picture
You can adjust the picture quality.
1 Display the <Video Menu> screen.
KW-V51BT KW-V31BT
2 Display the adjustment menu.
3 Select [ ] (dimmer on) or [ ] (dimmer
off).
4 Adjust the picture.
<Brightness> Adjusts the brightness. (−15
to +15)
<Contrast> Adjusts the contrast. (−10 to
+10)
<Black> Adjusts the blackness. (−10 to
+10)
<Color> Adjusts the color. (−10 to +10)
<Tint> Adjusts the tint. (−10 to +10)
<Detail> Adjusts the detail. (−2 to +2)
To Next Page
Loading...
