SETTINGS
Settings for using applications of
iPod/iPhone/Android
Before using applications of iPod/iPhone/Android
such as Pandora and iHeartRADIO, select the device
to use and connection method.
1 Pair the iPod/iPhone/Android device
through Bluetooth. (Page35)
2 Display the <APP Setup> screen.
On the Home screen:
• If [Enter] for <APP Setup> cannot be
selected, turn off the AV source. (Page6)
3
4 Check the current device status, then press
[Change].
• If you do not need to change the setting,
press [OK] to exit from the setup screen.
5 Select the device type (1), then press
[Next] (2).
6 Select the connection method (1), then
press [Next] (2).
For Android:
<HDMI/MHL
+ Bluetooth>
Select this when the Android is
connected both by cable to the
HDMI/MHL input terminal and
via Bluetooth.
<Bluetooth> Select this when the device is
connected via Bluetooth.
For iPod/iPhone:
<USB +
AV-IN>
Select this when the iPod/
iPhone is connected using
KS-U59 (optional accessory).
<USB 1 Wire> Select this when the iPod/
iPhone is connected using USB
2.0 cable (accessory of the iPod/
iPhone) or KS-U62 (optional
accessory).
<HDMI +
Bluetooth>
Select this when the iPod/iPhone
is connected using HDMI cable
KS-U60 (optional accessory) and
USB 2.0 cable (accessory of the
iPod/iPhone)/KS-U62 (optional
accessory) through a Lightning-
Digital AV adapter (accessory of
the iPod/iPhone).
<Bluetooth> Select this when the iPod/
iPhone is connected via
Bluetooth.
• When selecting <USB + AV-IN> or <USB 1
Wire>, go to step 8.
7 When selecting <HDMI + Bluetooth> or
<Bluetooth> as the connection method,
paired device list appears. Select the target
device.
• If desired device is not listed, press [Search]
for searching the available iPod/iPhone/
Android devices, then select the target device
from the <Available Devices> screen.
– You can change the page to display more
items by pressing [J]/[K].
– To stop searching, press [Cancel].
8 Confirm the settings.
To Next Page
Loading...
