EasyManua.ls Logo

JVC KW-V31BT - SETTINGS; CUSTOMIZING THE HOME SCREEN LAYOUT; CUSTOMIZING SYSTEM SETTINGS; ADJUSTING TOUCH PANEL POSITION

JVC KW-V31BT
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
SETTINGS
SETTINGS
Customizing the Home screen
You can arrange the items to display on the Home
screen.
1 Display the <Menu Customize> screen.
On the Home screen:
Press and hold the icon you want to replace.
(Hold)
2 Select the item you want to display in the
position selected in step 1 (1), then press
[HOME] (2).
Only selectable sources are shown.
Repeat the procedure to place icons for other
items.
Customizing the system settings
Memorizing/recalling the settings
You can memorize the following settings:
Settings on the <Settings> screen: Fader/
Balance, Equalizer, Loudness, Crossover
(<HPF>/<LPF>/<SW Level> settings), Volume
Adjust, Speaker Select, Display Design
• Settings for “AV-IN”: AV-IN Name
On the Home screen:
• Press [K] repeatedly to change the page on the
<System> menu screen.
[Recall] Recalls saved settings.
[Save] Memorizes current settings.
[Delete] Deletes the memorized settings.
A confirmation message appears. Press [Yes].
Adjusting the touch position
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1 Display the <Touch Panel Adjust> screen.
On the Home screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
2 Touch the center of the marks at the lower
left and at the upper right as instructed.
To reset the touch position, press [Reset].
To cancel the current operation, press
[Cancel].
KW-VMidJ.indb48 2014/12/0520:12

Related product manuals