JVC KW-V820BT - Voice Dialing; Presetting Phone Numbers

ENGLISH 45
BLUETOOTH
Voice dialing
t Available only when the connected mobile phone
has a voice recognition system.
1 Activate voice dialing.
t You can also activate voice dialing by
touching [
] on the pop-up short-cut menu.
(Page11) or holding HOME/
on the
monitor panel.
2 Say the name of the person you want to
call.
t If the voice command is not recognized, touch
[Restart], then say the name again.
To cancel voice dialing: Touch [Stop].
R Presetting phone numbers
You can preset up to 10 phone numbers.
1 Display the preset list. (Page43)
2
3 Select a position to store into.
4 Select a method to add a phone number to
preset list, then register the number to the
preset list.
[Add
number from
phonebook]
Select a phone number from
the phonebook (Page44).
[Add number
direct]
Enter a phone number on the
direct number entry screen,
then touch [Set] to add to the
preset list.
t To close the window, touch [Close].
t To display the preset list, touch [
] on the phone
control screen.
To delete a phone number from the preset list:
Select the phone number to delete on the <Edit
Preset Dial> screen, then touch [Delete] on the
<Edit Preset Number> window.
To delete all phone numbers from the preset list:
Touch [Delete all] on the <Edit Preset Dial> screen.