JVC KW-V820BT - Adjusting Touch Panel Position

60
SETTINGS
R Adjusting the touch position
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1 Display the <SETUP> screen.
On the Home screen:
t You can also display the <SETUP> screen by
touching [
] on the source/option selection
screen. (Page8)
2 Display the <User Interface> screen.
3 Display the <Touch Panel Adjust> screen.
4 Touch the center of the marks at the lower
left and at the upper right as instructed.
t To reset the touch position, press [Reset].
t To cancel the current operation, press
[Cancel].
Setting menu items—SETUP
R Displaying the <SETUP> menu screen
On the Home screen:
t You can also display the <SETUP> screen by
touching [
] on the source/option selection
screen. (Page8)