JVC KW-V820BT - Localizing Sound Image with Front Focus

54
SETTINGS
R Localizing the sound image—Front
Focus
You can localize the sound image in front of the
selected seat.
1 Display the <Position/DTA> screen.
(Page53)
2 Touch [Front Focus] (1), then select
the listening position to set as the front
position (2).
t When you are sitting on the [Front All] (front
seats) or [All] (front and rear seats) position,
select left (“Priority L”) or right (“Priority R”)
to specify the position to localize the sound
image.
3 Display the <Front Focus Adjust> screen.
4 Touch [Delay] (1), then adjust the sound
image precisely (2).
[Sound Image
LR (Front)]
Adjusts the sound image to
set on the front position.
[Sound Image
LR (Rear)]
Adjusts the sound image to
set on the rear position.
[Size of the
Virtual Sound
Field]
Adjusts the virtual sound field
to the desired field size.
t If the sound image moves
out of the front position,
adjust [Sound Image LR
(Front)]/[Sound Image LR
(Rear)].
[Subwoofer
Delay]
Adjusts the time alignment of
the subwoofer.
t To return to the initial setting of Delay and
Level, touch [Initialize] and [YES] in the
confirmation screen.
5 Touch [Level] (1), then adjust the output
volume for each speaker (2).
t Touch [H]/[I] to adjust the level.
t To return to the initial setting of Delay and
Level, touch [Initialize] and [YES] in the
confirmation screen.