EasyManua.ls Logo

JVC KW-V820BT - Connecting the GPS Antenna

JVC KW-V820BT
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70
CONNECTION/INSTALLATION
R Connecting the GPS antenna
Connect the GPS antenna (5) to the GPS terminal.
t To install the GPS antenna, fix the metal plate
(6) firmly on the dashboard, then place the GPS
antenna (5) on the metal plate (6).
Clean the dashboard or other surface
beforehand.
Install the GPS antenna (5) inside of the car, as
horizontally as possible to allow easy reception
of the GPS satellite signals.
You can bend the metal plate (6) to conform to
a curved surface, if necessary.
5
5
6
t Depending on the type of car, reception of the
GPS satellite signals might not be possible with an
internal installation.
t Install this GPS antenna in an area away from any
antennas that are used with CB radios or satellite
televisions.
t The GPS antenna should be installed at a position
at least 30 cm (12 inches) from mobile phone or
other transmitting antennas.
t The above types of communication may interfere
with signals from the GPS satellite.
t Painting the GPS antenna with (metallic) paint
may cause reduced performance.

Related product manuals