JVC KW-V820BT - Bluetooth Troubleshooting

ENGLISH 77
The iPod/iPhone not compatible with CarPlay
cannot be connected via Bluetooth.
t Select [ON] for [Automotive Mirroring] on the
<AV> menu screen. (Page22)
Videos cannot be played.
t Check the connection.
– For iPod/iPhone Lightning model: You cannot
watch video.
Other cables cannot be used.
No sound of videos comes out.
t Check the connection.
– For iPod/iPhone Lightning model: You cannot
watch video.
Other cables cannot be used.
R Tuner
SSM automatic presetting does not work.
t Store stations manually. (Page25)
Static noise while listening to the radio.
t Connect the antenna firmly.
R AV-IN
No picture appears on the screen.
t Turn on the video component if it is not on.
t Connect the video component correctly.
R Apple CarPlay
Desired source (“Apple CarPlay”) is not displayed
on the Home screen.
t Check whether the connected device is
compatible with CarPlay.
t When iPhone compatible with CarPlay is
connected, check the [Automotive Mirroring]
setting. (Page 22)
Navigation does not work for “Apple CarPlay”.
t Connect the GPS antenna firmly. (Page70)
R Bluetooth
Phone sound quality is poor.
t Reduce the distance between the unit and the
Bluetooth mobile phone.
t Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
t Reduce the distance between the unit and the
Bluetooth audio player.
t Disconnect the device connected for Bluetooth
phone.
t Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
t Check whether the connected audio player
supports AVRCP (Audio/Video Remote Control
Profile).
The Bluetooth device does not detect the unit.
t Search from the Bluetooth device again.
The unit does not pair with the Bluetooth device.
t For devices compatible with Bluetooth 2.1:
Register the device using a PIN code. (Page39)
t For devices compatible with Bluetooth 2.0:
Enter the same PIN code for both the unit and
target device. If the PIN code of the device is not
indicated in its instructions, try “0000” or “1234.”
t Turn off, then turn on the Bluetooth device.
Echo or noise occurs.
t Adjust the microphone unit position.
t Adjust the echo volume or noise reduction
volume. (Page42)
The unit does not respond when you try to copy
the phone book to the unit.
t You may have tried to copy the same entries (as
stored) to the unit.
REFERENCES