23English
Ñ 3-way speaker system setup
● KW-V850BT/ KW-V85BT
● KW-M750BT/ KW-M75BT/ KW-M650BT
When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
White/Black
Gray/Black
Green/Black
Purple/Black
Speaker impedance: 4-8 Ω
Purple
Green
Gray
White
To mid range left speaker
Subwoofer Preout
Subwoofer Preout
To mid range right speaker
Mid Range Preout
Mid Range Preout
To tweeter left speaker
Tweeter Preout
Tweeter Preout
To tweeter right speaker
Power amplifier
(optional
accessory)
RCA Cable
(Sold separately)
Input
Speaker
Preout
NOTE
• For speaker system setup, see 3-way speaker system setup (P.73) in the Instruction Manual.
• For speaker setup and crossover setup, see Speaker / X’over setup (P.74) in the Instruction Manual.
• For how to connect speaker wires to terminals other than speaker terminals and Preout terminals, see Connecting
the system and external components (P.24) and Connecting wires to terminals (P.21).
To Next Page
Loading...
