EasyManua.ls Logo

JVC KW-V960BW - Volume Offset

JVC KW-V960BW
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Controlling Audio
83English
[Bass EXT] (Bass Extend Settings)
When turned on, the frequencies lower than
62.5 Hz is set to the same gain level (62.5 Hz).
[SW Level]
Adjust the subwoofer volume. This setting
is not available when Subwoofer is set to
“None”. See Speaker / X’over setup (P.80).
Ñ Recall the EQ curve
1
Touch [Preset Select].
2
Select an EQ curve.
NOTE
[iPod] is available for the iPod and Apple CarPlay
sources and it is connected via USB.
[iPod] is also available for the Apple CarPlay
source that is connected wirelessly.
Ñ Save the EQ curve
1
Adjust the EQ curve.
2
Touch [Memory].
3
Select where to save.
Volume Offset
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
1
Press the [FNC] button.
Popup menu appears.
2
Touch [ ].
HOME screen appears.
3
Touch [ ].
SETUP screen appears.
4
Touch [Audio].
Audio screen appears.
5
Touch [Volume Offset].
6
Touch [+] or [] to adjust the level.
[Initialize]
Returns to the initial settings.
Touch [Initialize] and then touch [YES] on
the confirmation screen.
NOTE
If you have increased the volume first, then
reduce the volume using Volume Offset”.
Switching the current source to another source
suddenly may output extremely loud sound.

Table of Contents

Related product manuals