Controlling Audio
84
Zone Control
You can select different sources for front and
rear positions in the vehicle.
1
Press the [FNC] button.
Popup menu appears.
2
Touch [ ].
HOME screen appears.
3
Touch [ ].
SETUP screen appears.
4
Touch [Audio].
Audio screen appears.
5
Touch [Zone Control].
Zone Control screen appears.
6
Touch [Zone Select].
7
Touch [Dual Zone].
8
Set each source as follows.
■ [Zone Select]
Touch [Single Zone] to turn off the dual
zone function.
■ [Front Source], [Rear Source]
Select an audio source for each.
Rear Source;
“AV-IN”/“DISC”/“iPod”/“USB”/“OFF”
■ [Rear VOL.]
Adjust the rear source volume.
NOTE
• When the rear source is switched, the audio
source that is output at the AV OUTPUT terminal
is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/Bass Boost (P.85)
– Equalizer Control/Sound Effect/Listening
Position (P.82, 85, 86)
– Speaker Setup (P.80)
– High-resolution Sound Source File Playback
• When the dual zone is selected and audio source
other than "OFF" is selected as Rear Source, the
speaker system cannot be switched.
• You cannot select AV-IN if the AV-IN input
terminal is used for camera.
Rear Source
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, iPod, Tuner, DISC (Music CD/Disc
media) or Bluetooth audio as the Front Source,
you cannot select USB or iPod as the Rear Source.
• If you select Wireless Mirroring, Apple CarPlay or
Android Auto as the Front Source, you cannot
select DISC (Music CD/Disc media), USB or iPod as
the Rear Source.
To Next Page
Loading...
