EasyManua.ls Logo

JVC LT-19D200 - Page 22

JVC LT-19D200
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-22 (No.YA711<Rev.002>)
EV+9V is not output. (PANEL+13V is outputted normally.)
FLOW CHART NO.15
Is approximately +13V voltage supplied to the
collector of Q905?
Ye s
No
No
DVD-ON+3.3V is not output.
FLOW CHART NO.14
Is approximately +5V voltage supplied to the
collector of Q904?
Ye s
Check Q904, D906, and their periphery
circuit, and service it if def
ective.
Check Q905, D901 and their per
iphery circuit, and
service it if defective.
Check C638, D638 and their periphery circuit, and
service it if defective.
Check C643, D643, D644 and their periphery circuit,
and service it if defective.
Check C640, D640 and their per
iphery circuit,
and service it if defective.
Is approximately +4V voltage supplied to Pin(3) of
IC901?
Ye s
No
Check Q901, Q902, DVD-MAIN PWR line and their
periphery circuit, and service it if defective.
No
EV+1.2V is not output.
FLOW CHART NO.16
Is approximately +5V voltage supplied to the
emitter of Q901?
Ye s
Replace IC901.
P-ON+9V is not output. (PANEL+13V is outputted normally.)
FLOW CHART NO.17
Is approximately +13V voltage supplied to the
collector of Q641?
Is approximately +10V voltage supplied to the
base of Q641?
No
Ye s
Ye s
Check D666 and their periphery circuit, and ser
vice
it if defective.
Check C643, D643, D644 and their periphery circuit,
and service it if defective.
No
Replace Q641.

Other manuals for JVC LT-19D200

Related product manuals