JVC LT-37DS6BJ - Page 44

44
Problem Actions page
"FEATURE NOT
AVAILABLE"
46
46
-
Error message Screen
Press to start ACI again.
If you still receive the "ACI ERROR" after numerous tries,
press to cancel ACI.
"ACI ERROR"
-
LCD panels use fi ne dots ("pixels") to display images.
While more than 99.99% of these pixels function properly,
a very small number of pixels may not light,
or may light all the time.
Please understand that this is not a malfunction.
Black or white dots
appear on the screen
-
Troubleshooting
(continued)
DTV channels, EXT-4/EXT-5 inputs, and PC mode
cannot be selected in the sub-picture.
Some inputs are
skipped in the
sub-picture
-
Functions
Wait a little for the signal to stabilize when switching
the signal format for an HDMI device.
Green and
distorted screen
-
Switch AUDIO in HDMI SETTING to ANALOGUE or DIGITAL.
No sound
33
Switch SIZE in HDMI SETTING to "1" or "2".
Wrong screen size
33
HDMI
Is the T-V LINK compatible device connected to EXT-2?
Is the SCART CABLE "Fully Wired"?
Is the T-V LINK compatible device turned on?
After confi rming all the conditions above,
press "OK" button again.
The recorder is recording another programme, or is playing.
"NO RECORDING
DEVICE BUSY"
-
The recorder is not ready for recording.
Check the videotape or DVD disc.
"NO RECORDING
MEDIA PROBLEM"
-
The displayed video cannot be recorded.
"NO RECORDING
POSSIBLE"
-
A problem occurs at the recorder.
"NO RECORDING"
-
LT-32&26DS6BJSJ.indd 44LT-32&26DS6BJSJ.indd 44 4/12/2005 3:37:47 PM4/12/2005 3:37:47 PM