To Next PageTo Next PageWhat to do if the JVC LCD TV remote control doesn't work?
If your JVC LCD TV remote control isn't working, first check if the batteries are flat and replace them if needed. If that doesn't solve the problem, try unplugging the TV, waiting a few minutes, and then plugging it back in.
How to reset the PIN code on a JVC LCD TV?
The default PIN code for your JVC LCD TV is “0000”. If you've changed it and forgotten the new code, input “0081” in the “Enter PIN code” field, and then register a new PIN code.
Why does my JVC LT-47DV1BU say 'Missing or weak signal'?
If your JVC LCD TV displays a 'Missing or weak signal' message, first ensure the TV is correctly connected to the aerial. Try changing the direction of the indoor aerial. Also you can check digital channels signal with “Signal Check”.
How to fix severe noise or snow on JVC LCD TV?
To address severe noise or snow on your JVC LCD TV, try changing the direction of the aerial. If the aerial or its cable is damaged, consult your retailer.
What to do if JVC LT-47DV1BU screen is frozen?
If your JVC LCD TV screen is frozen, try touching “MENU” (TV) and continuously pressing “ ”,“ ” (remote) with under 2 seconds of interval. If the issue persists, unplug the TV, wait a few minutes, and then plug it back in.
How to improve poor sound quality on JVC LT-47DV1BU LCD TV?
To improve poor sound quality on your JVC LCD TV, reset the “Sound” menu settings. If receiving a poor signal in “Stereo/ t·u”, switch to “v” (monaural). You can also try changing the broadcasting system using “Manual Scan”. Check the output setting and signal format of any connected devices, and use a cable marked with the HDMI logo, ensuring the device is HDMI compliant.
Why does my JVC LT-47DV1BU have patterns, stripes, or noise?
Patterns, stripes, or noise on your JVC LCD TV might be due to interference from high-voltage power lines or wireless transmitters affecting the aerial. Place a minimum distance between the aerial and the cause of interference until no interference.
How to fix ghosting (doubling of images) on JVC LT-47DV1BU LCD TV?
Ghosting on your JVC LCD TV could be due to interference from signals reflected off mountains or buildings. Adjust the direction of your aerial, or change to a good one.
Why can locked channels be watched without inputting PIN code on JVC LT-47DV1BU LCD TV?
Once the PIN code is input on your JVC LCD TV, the lock functions (“Lock” and “Maturity Rating”) are released. To re-enable the lock functions, turn the TV off and then turn it on again.
Why did my JVC LCD TV suddenly turn off?
If your JVC LCD TV is turned on by using “Hand Clap Function” and no operation is made by a remote or a touch censor for 3 hours the TV will automatically turn off.
General
