22
Menu system instruction
1. Press key to display the main menu on the screen.MENU
2. Press key to select "Picture" option. p/q
3. Press key to enter "Picture" submenu.u
Picture Mode
Your TV has these picture settings that are preset at the factory. Only "User" mode can be set to
your preference by adjusting particular items such as Contrast, Brightness, Color, Sharpness.
1. Press / key to select "Picture Mode" option. p q
2. Press / key to select one picture mode.t u
User settings for PICTURE (Contrast, Brightness, Color, Sharpness,Tint, Backlight)
Your set has several settings which allow you to control picture quality.
1. Press ▲/▼ key to select a particular item.
2. Press / key to decrease or increase the value of a particular item. t u
Note: The adjusted values are stored according to the selected particular item.
Color Temperature
You can change the color of the entire screen according to your preference.
1. Press p/q key to select "Color Temperature" option.
2. Press t/u key to select color temp.
Aspect Ratio
1. Press p/q key to select “Aspect Ratio” option.
2. Press t/u key to change the size of the picture on the screen.
Noise Reduction
Press p/q key to select the Noise Reduction mode.
You can select the right mode to match the pictures.
Open HDR
1. Press p/q key to select “Open HDR” option.
2. Press t/u key to select “Auto”, “Low”, “Middle” or “High”.
Picture
Sound
Setting
Lock
PVR Option
Program
Network
About
Sharpness
Tint
Backlight
Color Temperature
50
0
100
t Standard u
Picture
Picture Mode
Contrast
Brightness
Color
t Standard u
50
50
50
Picture
Sound
Setting
Lock
PVR Option
Program
Network
About
Aspect Ratio
Noise Reduction
Open HDR
t Standard u
t 16:9 u
t Middle u
Picture
Picture
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the picture.
Color: Adjusts the colors, making them lighter or darker.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Tint: Adjusts the Tint of the picture. Note: This adjustment is only available for NTSC signals.
Backlight: Adjusts the brightness of the whole screen.