JVC LT-65N7105A User Manual

32
Menu system instruction
Network
1. Press MENU key to display the main menu on the screen.
2. Press p/q key to select "Network" option.
3. Press u key to enter "Network" submenu.
Wi-Fi
To connect to Wi-Fi using "Autoscan", select "Autoscan"
option and press key to select your Wi-Fi network.
Enter the password to connect to the Wi-Fi network.
For manual input, select "Manual Input" option, then
set up IP, Netmask, Gateway and DNS.
Press “Connect” when the setup is complete.
Ethernet
To connect to wired network, using Dynamic IP address
setting, select "DHCP" in Configuration, then press
"Connect" to enter.
If using Static IP address setting, select "Static" in
Configuration, then set up IP, Netmask, Gateway and
DNS. Press "Connect" when setup is complete.
Wake On LAN/Wake On WLAN
Use the ◄/► Buttons to turn on these functions. Your
mobile phone should be in the same network as the
TV.
Network
Network / Ethernet
Conguration
IP
Netmask
Gateway
DNS
Connect
255.255.254.0
172.16.66.254
Static
172.16.67.130
172.16.64.81
Network
Wi-Fi
Ethernet
Wake On LAN
Wake On WLAN
On
ut
On
ut
Not Connected
Not Connected
ut
Picture
Sound
PVR Option
About
Setting
Lock
Programe
Network
Picture
Sound
PVR Option
About
Setting
Lock
Programe
Network
Network
Network / Wi-Fi
Auto Scan
Manual Input
Network
Network / Wi-Fi
Searching, Please Wait...
Picture
Sound
Setting
Picture
Sound
Setting

JVC LT-65N7105A Specifications

General

Brand	JVC
Model	LT-65N7105A
Category	LED TV
Language	English