Display the menu bar
Select “Set Up”
Select “Edit / Manual”
Finish
When coming from “Initial settings” (P. 9), skip to ⁄.
Select a row
Edit
Move a
channel’s
position
MOVE
Editing channels
Edit the channels registered with “Auto Program” in “Initial settings” (P. 9).
To the previous
screen
Exit
1
2
3
4
5
6
Edit a
channel
name
ID
Insert a
channel
INSERT
Delete a
channel
DELETE
Register a
new channel
MANUAL
select
move out
move in
select
1 enter the first
character
From high
frequencies
or
/
select a system
Receives the
broadcast
signal.
If you can not receive the
channel you want to view,
press 3 to change the sound
system.
“Sound system in your
country or region” (P. 37)
Auto-search begins,
and the nearest
frequency is imported.
Repeat the previous
steps until the
desired channel is
displayed
From low
frequencies
“CH/CC” List (P. 39)
1 Begin 2 Select a destination 3 Finish
1 Begin 2 Enter a channel name
2 Select a “CH / CC” 3 Enter a number
2
Beginning channel search
1 Begin
3 Set
Adjust
Channel fine tuning
If the picture or sound is unnatural
1 select
2 next
1 select
2 next
set
1 Begin
select
1 Delete
(red)
(red)
2
next column
(green)
(yellow)
(blue)
(green)
(blue)
(yellow)
11-12 4/12/200611:37:31AM
To Next Page
Loading...
