(No.MB011)1-15
3.2 Front panel assembly
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and the front
panel assembly.
3.2.1 Removing the cassette mechanism assembly
(See Fig.27)
(1) Disconnect the card wire from connector CN306
on the
head amplifier & mechanism control board.
(2) Remove the seven screws N attaching the cassette mech-
anism assembly.
Fig.27
Head amplifier
& mechanismcontrol board
CN306
N
N
N
N
Cassette mechanism
assembly
To Next Page
Loading...
