EasyManuals Logo

JVC MX-J100 Instructions

JVC MX-J100
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
– 14 –
English
Playing Back a Tape
1
Press EJECT (0) for the deck you want to
use.
2
Put a cassette in, with the exposed part of the
tape down.
You can play back only the type I tapes.
3
Close the cassette holder gently.
If you put cassettes in both decks A and B, the deck which
you have put a cassette into last is selected.
To operate the other deck, press TAPE A/B.
4
Press TAPE
33
33
3.
The tape play starts.
When the tape plays to the end, the deck automatically stops .
0EJECT
Playing Back Tapes
For Deck A
To stop during play, press 7.
To operate the other deck, press TAPE A/B, then TAPE 3.
To fast-forward the tape, press ¡ (or ¢ / ¡ on the
remote control).
To rewind the tape, press 1 (or 4 / 1 on the remote
control).
To remove the cassette, press 0 EJECT for deck A or
EJECT 0 for deck B.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
For Deck B
TAPE
0EJECT
EN12-14.MX-J100[U,US]/f 00.4.27, 2:36 PM14

Other manuals for JVC MX-J100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC MX-J100 and is the answer not in the manual?

JVC MX-J100 Specifications

General IconGeneral
BrandJVC
ModelMX-J100
CategorySpeaker System
LanguageEnglish

Related product manuals