JVC MX-S6MD - Page 30

MX-S6MD
1-30
Insert a screwdriver under the ornament grille and
remove it from the body.
1.
Remove the three screws B and the tweeter from
the body. Disconnect the wire from the speaker
terminals.
3.
Removing the speaker (tweeter) (See Fig.4 and 5)
As the ornament grille is damaged,
replace it with the tweeter.
ATTENTION:
Fig.4
Fig.5
Driver
Ornament grille
Tweeter
Tweeter
B
B
AA
Woofer