JVC PC-X95B User Manual

C-X95pve/ceve |
CASSETTE PLAYBACK
(The example shows deck A)
Operate in order shown.
TEGRCTION)
coe
=. @ Set to TAPE.
LD Set the TAPE switch as required.
NORMAL
ay
cas
@ Set to ON. (-—)-
@ Adjust.
@e Load a cassette.
is
@ Playback in deck B
The
previous
procedures
4]
and
8
also
apply
to
deck
B
when
a
cassette
is
loaded
in
deck
B.
When
decks
A
and
B
are
simultaneously
set
to
the
play
mode,
only
the
playback
sound of deck B is heard.
RELAY PLAYBACK
(From deck B to deck A)
Operate in order shown.
3] Adjust.
Press to start playback.
Notes:
1. When the power is turned off while the tape is running,
cassette operation buttons which are depressed do not
return to the original positions.
Press the M@/4 STOP/EJECT button to stop the tape
running before turning off the power.
2. Avoid operating the FF or REW button on the deck during
playback of the other deck.
rene
Set to TAPE. =...
by Set the TAPE switch as required.
@ Set to ON. (-—)
@ Load a cassette.
B) Load a cassette.
Notes:
1. Use the same type of tape in decks A and B.
@ Set deck A to the play-pause mode. :
2. When deck B stops, deck A’s pause mode will be released and it will start playback. When deck A stops automatically, relay playback will be
released.
10 (No. 1859)

JVC PC-X95B Specifications

General

Brand	JVC
Model	PC-X95B
Category	CD Player
Language	English