32
Playback
Preparation:
•
Turn on the TV.
•
Turn on the power( ) of the camcorder and select the playback mode.
To connect using the dedicated AV cable (provided)( )
Yellow
Video Input
Video Input
Audio Input
(
L)
Audio Input (R)
White
Red
To connect using the HDMI mini cable (optional)( )
1
Connect the camcorder to a TV.
2
Switch to the TV’s external input connector.
3
Start the playback. (P.28)
NOTE
•
Use the supplied AV cable. Otherwise, image and sound cannot be output.
•
If the AV cable or HDMI cable is disconnected during playback, the playback will be
paused.
•
When an AV cable and an HDMI cable are connected, output to the HDMI cable is prioritized.
•
Also refer to instruction manual of the TV.
•
We recommend using the Category 2 HDMI cable (High Speed cable).
•
Insert the connector in the right direction. Forcing the connector into the terminal
may cause damage.
•
If you connect the camcorder using the AV cable, image is output only when playing
back video. If you connect the camcorder using the HDMI Mini connector, image is
output when both playing back and recording video. However, if you connect the
camcorder to a TV with 480p or 480i resolution, image is output only when playing
back video.
•
Image is not output during the audio recording and audio playback.
Viewing Files on TV
To Next Page
Loading...
