20
English
From the remote control:
Before starting the procedure below, make sure you have selected FM station only using
the remote control. If not, the following RDS operating buttons do not work for tuner
operation. (Pressing TUNER/BAND activates the remote control for tuner operation.)
1. Press PTY SEARCH while listening to an FM
station.
“PTY” and “SELECT” alternate on the display.
2. Press PTY SELECT +/– until the PTY code you
want appears on the display.
The display gives you the PTY codes described on page 21.
3. Press PTY SEARCH again.
While searching, “SEARCH” and the selected PTY
code alternate on the display.
The receiver searches 40 preset channels, stops when it
finds the one you have selected, and tunes in that
station.
To continue searching after the first stop:
Press PTY SEARCH again while the indications on the
display are flashing.
If no program is found, “NOTFOUND” appears on the
display.
To stop searching any time during the process:
Press PTY SEARCH while searching.
PTY SEARCH
–+
PTY SELECT
PTY SEARCH
PTY SEARCH
RX-554RBK(EE)_0118-001A_En01-23 98.1.30, 2:20 PM20
To Next Page
Loading...
Need help?
General
