1-20 (No.MB665<Rev.004>)
SECTION 4
ADJUSTMENT
4.1 Outline
4.2 How to go CD TEST MODE
[STOP] + [CD] + AC in
4.3 Function specification
4.4 C1 error history
When 8 key is pressed, syscon send C1 err display command (0x9C 0x01 0x00).
If syscon receive C1 error display status (0xAA 0x01 0x00 ** **), it displays C1 error.
Syscon convert 2byte hex data to decimal data (00000-65635).
4.5 Special mode
[POWER] + [SET] + [REPEAT]: COLD SET
[POWER] + [SET] + [S.TURBO]: FL DISPLAY turn on all segment
[POWER] + [SET] + [BASS/TRE]:Micon version display
press again and again Syscon version
CD version
USB version
Destination
Model name
CD TEST MODE
C1 error display
Function
CD TEST MODE
C1 error display
C1 error display
Return to CD TEST MODE
Remocon
Remocon After receive data
Remocon
>>|
CANCEL
Key Operation FL display
CD TESTT
INITIAL
Er
*****
CD TESTT
To Next Page
Loading...
Need help?
General
